Irish Folklore Commission 1935-1970 : history, ideology, methodology

Between 1935 and 1970 the state-funded Irish Folklore Commission (Coimisiún Béaloideasa Éireann) assembled one of the great folklore collections of the world under the direction of Séamus Ó Duilearga (James Hamilton Delargy). The aim of this study is to recount and assess the work and achievement of this commission. The cultural, linguistic, political and ideological factors that had a bearing on the establishment and making permanent of the Commission and that impinged on many aspects of its work are here elucidated. The genesis of the Commission is traced and the vision and mission of Séamus Ó Duilearga are outlined. The negotiations that preceded the setting up of the Commission in 1935 as well as protracted efforts from 1940 to 1970 to place it on a permanent foundation are recounted and examined at length. All the various collecting programmes and other activities of the Commission are described in detail and many aspects of its work are assessed. This study also deals with the working methods and conditions of employment of the Commission s field and Head Office staff as well as with Séamus Ó Duilearga s direction of the Commission. In executing this work extensive use has been made of primary sources in archives and libraries in Ireland, Sweden, Finland, Estonia, and North America. This is the first major study of this world-famous institute, which has been praised in passing in numerous publications, but here for the first time its work and achievement are detailed comprehensively and subjected to scholarly scrutiny. This study should be of interest not only to students of Irish oral tradition but to folklorists everywhere. The history of the Irish Folklore Commission is a part of a wider history, that of the history of folkloristics in Europe and North America in particular. Moreover, this work has relevance for many areas of the developing world today, where conditions are not dissimilar to those that pertained in Ireland in the 1930's when this great salvage operation was funded by the young, independent Irish state. It is also hoped that this work will be of practical assistance to scholars and the general public when utilising these collections, and that furthermore it will stimulate research into the assembling of other national collections of folklore as well as into the history of folkloristics in other countries, subjects which in recent years are beginning to attract more and more scholarly attention.

Molecular Genetic Background of Tumours in Hereditary Leiomyomatosis and Renal Cell Cancer Syndrome

Hereditary Leiomyomatosis and Renal Cell Cancer (HLRCC) is a hereditary tumour predisposition syndrome. Its phenotype includes benign cutaneous and uterine leiomyomas (CLM, ULM) with high penetrance and rarer renal cell cancer (RCC), most commonly of papillary type 2 subtype. Over 130 HLRCC families have been identified world-wide but the RCC phenotype seems to concentrate in families from Finland and North America for unknown reasons. HLRCC is caused by heterozygous germline mutations in the fumarate hydratase (FH) gene. FH encodes the enzyme fumarase from mitochondrial citric acid cycle. Fumarase enzyme activity or type or site of the FH mutation are unassociated with disease phenotype. The strongest evidence for tumourigenesis mechanism in HLRCC supports a hypoxia inducible factor driven process called pseudohypoxia resulting from accumulation of the fumarase substrate fumarate. In this study, to assess the importance of gene- or exon-level deletions or amplifications of FH in patients with HLRCC-associated phenotypes, multiplex ligation-dependent probe amplification (MLPA) method was used. One novel FH mutation, deletion of exon 1, was found in a Swedish male patient with an evident HLRCC phenotype with CLM, RCC, and a family history of ULM and RCC. Six other patients with CLM and 12 patients with only RCC or uterine leiomyosarcoma (ULMS) remained FH mutation-negative. These results suggest that copy number aberrations of FH or its exons are an infrequent cause of HLRCC and that only co-occurrence of benign tumour types justifies FH-mutation screening in RCC or ULMS patients. Determination of the genomic profile of 11 HLRCC-associated RCCs from Finnish patients was performed by array comparative genomic hybridization. The most common copy number aberrations were gains of 2, 7, and 17 and losses of 13q12.3-q21.1, 14, 18, and X. When compared to aberrations of sporadic papillary RCCs, HLRCC-associated RCCs harboured a distinct DNA copy number profile and lacked many of the changes characterizing the sporadic RCCs. The findings suggest a divergent molecular pathway for tumourigenesis of papillary RCCs in HLRCC. In order to find a genetic modifier of RCC risk in HLRCC, genome-wide linkage and identical by descent (IBD) analysis studies were performed in Finnish HLRCC families with microsatellite marker mapping and SNP-array platforms. The linkage analysis identified only one locus of interest, the FH gene locus in 1q43, but no mutations were found in the genes of the region. IBD analysis yielded no convincing haplotypes shared by RCC patients. Although these results do not exclude the existence of a genetic modifier for RCC risk in HLRCC, they emphasize the role of FH mutations in the malignant tumourigenesis of HLRCC. To study the benign tumours in HLRCC, genome-wide DNA copy number and gene expression profiles of sporadic and HLRCC ULMs were defined with modern SNP- and gene-expression array platforms. The gene expression array suggests novel genes involved in FH-deficient ULM tumourigenesis and novel genes with putative roles in propagation of sporadic ULM. Both the gene expression and copy number profiles of HLRCC ULMs differed from those of sporadic ULMs indicating distinct molecular basis of the FH-deficient HLRCC tumours.

Lignocellulose degradation and humus modification by the fungus Paecilomyces inflatus

Composting is the biological conversion of solid organic waste into usable end products such as fertilizers, substrates for mushroom production and biogas. Although composts are highly variable in their bulk composition, composting material is generally based on lignocellulose compounds derived from agricultural, forestry, fruit and vegetable processing, household and municipal wastes. Lignocellulose is very recalcitrant; however it is rich and abundant source of carbon and energy. Therefore lignocellulose degradation is essential for maintaining the global carbon cycle. In compost, the active component involved in the biodegradation and conversion processes is the resident microbial population, among which microfungi play a very important role. In composting pile the warm, humid, and aerobic environment provides the optimal conditions for their development. Microfungi use many carbon sources, including lignocellulosic polymers and can survive in extreme conditions. Typically microfungi are responsible for compost maturation. In order to improve the composting process, more information is needed about the microbial degradation process. Better knowledge on the lignocellulose degradation by microfungi could be used to optimize the composting process. Thus, this thesis focused on lignocellulose and humic compounds degradation by a microfungus Paecilomyces inflatus, which belongs to a flora of common microbial compost, soil and decaying plant remains. It is a very common species in Europe, North America and Asia. The lignocellulose and humic compounds degradation was studied using several methods including measurements of carbon release from 14C-labelled compounds, such as synthetic lignin (dehydrogenative polymer, DHP) and humic acids, as well as by determination of fibre composition using chemical detergents and sulphuric acid. Spectrophotometric enzyme assays were conducted to detect extracellular lignocellulose-degrading hydrolytic and oxidative enzymes. Paecilomyces inflatus secreted clearly extracellular laccase to the culture media. Laccase was involved in the degradation process of lignin and humic acids. In compost P. inflatus mineralised 6-10% of 14C-labelled DHP into carbon dioxide. About 15% of labelled DHP was converted into water-soluble compounds. Also humic acids were partly mineralised and converted into water-soluble material, such as low-molecular mass fulvic acid-like compounds. Although laccase activity in aromatics-rich compost media clearly is connected with the degradation process of lignin and lignin-like compounds, it may preferentially effect the polymerisation and/or detoxification of such aromatic compounds. P. inflatus can degrade lignin and carbohydrates also while growing in straw and in wood. The cellulolytic enzyme system includes endoglucanase and β-glucosidase. In P. inflatus the secretion of these enzymes was stimulated by low-molecular-weight aromatics, such as soil humic acid and veratric acid. When strains of P. inflatus from different ecophysiological origins were compared, indications were found that specific adaptation strategies needed for lignocellulosics degradation may operate in P. inflatus. The degradative features of these microfungi are on relevance for lignocellulose decomposition in nature, especially in soil and compost environments, where basidiomycetes are not established. The results of this study may help to understand, control and better design the process of plant polymer conversion in compost environment, with a special emphasis on the role of ubiquitous microfungi.

Vedestä vai Hengestä? : Uuras Saarnivaaran kasteteologia

Of water or the Spirit? Uuras Saarnivaara s theology of baptism The aim of the study was to investigate PhD and ThD Uuras Saarnivaara s views on baptism as well as their possible changes and the reasons for them. Dr Saarnivaara said himself that he searched for the truth about the relationship between baptism and faith for decades, and had faltered in his views. The method of this research is systematic analysis. A close study of the source material shows that Dr Saarnivaara s views on baptism have most likely changed several times. Therefore, special attention was paid to the time periods defined by when his literary works were published. This resulted in revealing the different perspectives he had on baptism. The fact that Dr Saarnivaara worked on two continents Europe and North America added a challenge to the research process. At the beginning of the research, I described Dr Saarnivaara s phases of life and mapped out his vast literary production as well as presented his theological basis. Saarnivaara s theological view on the means of grace and their interrelation in the church was influenced by the Laestadian movement, which caused him to adopt the view that the Holy Spirit does not dwell in the means of grace, but in the believers. Thus the real presence of Christ in the means of grace is denied. God s word is divided into Biblical revelation and proclamation by believers through the means of grace. Also, the sacraments are overshadowed by the preached word. Because grace is received through the word of the gospel preached publicly or privately by a believer, the preacher s status gains importance at the expense of the actual means of grace. Saarnivaara was intrigued by the content of baptism from the time he was a student until the end of his life. As a young theologian, he would adopt the opinions of his teachers as well as the view of the Evangelical Lutheran Church of Finland, which at the time was dominated by the pietistic movement and the teachings of J. T. Beck. After Saarnivaara had converted to the Laestadian movement, moved to the United States and started his Luther research, he adopted a view on baptism which was to a great extent in accordance with Luther and the Lutheran Symbolical Books. Saarnivaara considered his former views on baptism unbiblical and publicly apologised for them. In the 1950s, after starting his ministry within the Finnish neopietistic movements, Saarnivaara adopted a Laestadian-neopietistic doctrine of baptism. During his Beckian-pietistic era, Saarnivaara based his baptism theology on the event of the disciples of Jesus being baptised by John the Baptist, the revival of Samaria in the Book of Acts and the conversion of Cornelius and his family, all cases where the receiving of the Holy Spirit and the baptism were two separate events in time. In order to defend the theological unity of the Bible, Saarnivaara had to interpret Jesus teachings on baptism in the Gospels and the teachings of the Apostles in the New Testament letters from a viewpoint based on the three events mentioned above. During his Beckian-pietistic era, the abovementioned basic hermeneutic choice caused Saarnivaara to separate baptism by water and baptism by the Holy Spirit in his salvation theology. Simultaneously, the faith of a small child is denied, and rebirth is divided into two parts, the objective and the subjective, the latter being moved from the moment of baptism to a possible spiritual break-through at an age when the person possesses a more mature understanding. During his Laestadian-Lutheran era, Saarnivaara s theology of baptism was biblically consistent and the same for all people regardless of the person s age. Small children receive faith in baptism through the presence of Christ. The task of other people s faith is limited to the act of bringing the child to the baptism so that the child may receive his/her own faith from Christ and be born again as a child of God. The doctrine of baptism during Saarnivaara s Laestadian-neopietistic era represents in many aspects the emphases he presented during his first era, although they were now partly more radical. Baptism offers grace; it is not a means of grace. Justification, rebirth and salvation would take place later on when a person had reached an age with a more mature understanding through the word of God. A small child cannot be born again in baptism because being born again requires personal faith, which is received through hearing and understanding the law and the gospel. Saarnivaara s views on baptism during his first and third era are, unlike during his second era, quite controversial. The question of the salvation of a small child goes unanswered, or it is even denied. The central question during both eras is the demand of conversion and personal faith at a mature age. The background for this demand is in Saarnivaara s anthropology, which accentuates man s relationship to God as an intellectual and mental matter requiring understanding, and which needs no material instruments. The two first theological eras regarding Saarnivaara s doctrine of baptism lasted around ten years. The third era lasted over 40 years until his death.

Road Dust from Pavement Wear and Traction Sanding

Vehicles affect the concentrations of ambient airborne particles through exhaust emissions, but particles are also formed in the mechanical processes in the tire-road interface, brakes, and engine. Particles deposited on or in the vicinity of the road may be re-entrained, or resuspended, into air through vehicle-induced turbulence and shearing stress of the tires. A commonly used term for these particles is road dust . The processes affecting road dust emissions are complex and currently not well known. Road dust has been acknowledged as a dominant source of PM10 especially during spring in the sub-arctic urban areas, e.g. in Scandinavia, Finland, North America and Japan. The high proportion of road dust in sub-arctic regions of the world has been linked to the snowy winter conditions that make it necessary to use traction control methods. Traction control methods include dispersion of traction sand, melting of ice with brine solutions, and equipping the tires with either metal studs (studded winter tires), snow chains, or special tire design (friction tires). Several of these methods enhance the formation of mineral particles from pavement wear and/or from traction sand that accumulate in the road environment during winter. When snow and ice melt and surfaces dry out, traffic-induced turbulence makes some of the particles airborne. A general aim of this study was to study processes and factors underlying and affecting the formation and emissions of road dust from paved road surfaces. Special emphasis was placed on studying particle formation and sources during tire road interaction, especially when different applications of traction control, namely traction sanding and/or winter tires were in use. Respirable particles with aerodynamic diameter below 10 micrometers (PM10) have been the main concern, but other size ranges and particle size distributions were also studied. The following specific research questions were addressed: i) How do traction sanding and physical properties of the traction sand aggregate affect formation of road dust? ii) How do studded tires affect the formation of road dust when compared with friction tires? iii) What are the composition and sources of airborne road dust in a road simulator and during a springtime road dust episode in Finland? iv) What is the size distribution of abrasion particles from tire-road interaction? The studies were conducted both in a road simulator and in field conditions. The test results from the road simulator showed that traction sanding increased road dust emissions, and that the effect became more dominant with increasing sand load. A high percentage of fine-grained anti-skid aggregate of overall grading increased the PM10 concentrations. Anti-skid aggregate with poor resistance to fragmentation resulted in higher PM levels compared with the other aggregates, and the effect became more significant with higher aggregate loads. Glaciofluvial aggregates tended to cause higher particle concentrations than crushed rocks with good fragmentation resistance. Comparison of tire types showed that studded tires result in higher formation of PM emissions compared with friction tires. The same trend between the tires was present in the tests with and without anti-skid aggregate. This finding applies to test conditions of the road simulator with negligible resuspension. Source and composition analysis showed that the particles in the road simulator were mainly minerals and originated from both traction sand and pavement aggregates. A clear contribution of particles from anti-skid aggregate to ambient PM and dust deposition was also observed in urban conditions. The road simulator results showed that the interaction between tires, anti-skid aggregate and road surface is important in dust production and the relative contributions of these sources depend on their properties. Traction sand grains are fragmented into smaller particles under the tires, but they also wear the pavement aggregate. Therefore particles from both aggregates are observed. The mass size distribution of traction sand and pavement wear particles was mainly coarse, but fine and submicron particles were also present.

Molecular epidemiology of human rhinoviruses

The first part of this work investigates the molecular epidemiology of a human enterovirus (HEV), echovirus 30 (E-30). This project is part of a series of studies performed in our research team analyzing the molecular epidemiology of HEV-B viruses. A total of 129 virus strains had been isolated in different parts of Europe. The sequence analysis was performed in three different genomic regions: 420 nucleotides (nt) in the VP4/VP2 capsid protein coding region, the entire VP1 capsid protein coding gene of 876 nt, and 150 nt in the VP1/2A junction region. The analysis revealed a succession of dominant sublineages within a major genotype. The temporally earlier genotypes had been replaced by a genetically homogenous lineage that has been circulating in Europe since the late 1970s. The same genotype was found by other research groups in North America and Australia. Globally, other cocirculating genetic lineages also exist. The prevalence of a dominant genotype makes E-30 different from other previously studied HEVs, such as polioviruses and coxsackieviruses B4 and B5, for which several coexisting genetic lineages have been reported. The second part of this work deals with molecular epidemiology of human rhinoviruses (HRVs). A total of 61 field isolates were studied in the 420-nt stretch in the capsid coding region of VP4/VP2. The isolates were collected from children under two years of age in Tampere, Finland. Sequences from the clinical isolates clustered in the two previously known phylogenetic clades. Seasonal clustering was found. Also, several distinct serotype-like clusters were found to co-circulate during the same epidemic season. Reappearance of a cluster after disappearing for a season was observed. The molecular epidemiology of the analyzed strains turned out to be complex, and we decided to continue our studies of HRV. Only five previously published complete genome sequences of HRV prototype strains were available for analysis. Therefore, all designated HRV prototype strains (n=102) were sequenced in the VP4/VP2 region, and the possibility of genetic typing of HRV was evaluated. Seventy-six of the 102 prototype strains clustered in HRV genetic group A (HRV-A) and 25 in group B (HRV-B). Serotype 87 clustered separately from other HRVs with HEV species D. The field strains of HRV represented as many as 19 different genotypes, as judged with an approximate demarcation of a 20% nt difference in the VP4/VP2 region. The interserotypic differences of HRV were generally similar to those reported between different HEV serotypes (i.e. about 20%), but smaller differences, less than 10%, were also observed. Because some HRV serotypes are genetically so closely related, we suggest that the genetic typing be performed using the criterion "the closest prototype strain". This study is the first systematic genetic characterization of all known HRV prototype strains, providing a further taxonomic proposal for classification of HRV. We proposed to divide the genus Human rhinoviruses into HRV-A and HRV-B. The final part of the work comprises a phylogenetic analysis of a subset (48) of HRV prototype strains and field isolates (12) in the nonstructural part of the genome coding for the RNA-dependent RNA polymerase (3D). The proposed division of the HRV strains in the species HRV-A and HRV-B was also supported by 3D region. HRV-B clustered closer to HEV species B, C, and also to polioviruses than to HRV-A. Intraspecies variation within both HRV-A and HRV-B was greater in the 3D coding region than in the VP4/VP2 coding region, in contrast to HEV. Moreover, the diversity of HRV in 3D exceeded that of HEV. One group of HRV-A, designated HRV-A', formed a separate cluster outside other HRV-A in the 3D region. It formed a cluster also in the capsid region, but located within HRV-A. This may reflect a different evolutionary history of distinct genomic regions among HRV-A. Furthermore, the tree topology within HRV-A in the 3D region differed from that in the VP4/VP2, suggesting possible recombination events in the evolution of the strains. No conflicting phylogenies were observed in any of the 12 field isolates. Possible recombination was further studied using the Similarity and Bootscanning analyses of the complete genome sequences of HRV available in public databases. Evidence for recombination among HRV-A was found, as HRV2 and HRV39 showed higher similarity in the nonstructural part of the genome. Whether HRV2 and HRV39 strains - and perhaps also some other HRV-A strains not yet completely sequenced - are recombinants remains to be determined.

Characterisation of cellulose- and lignin-based materials using x-ray scattering methods

Wood is an important material for the construction and pulping industries. Using x-ray diffraction the microfibril angle of Sitka spruce wood was studied in the first part of this thesis. Sitka spruce (Picea sitchensis [Bong.] Carr.) is native to the west coast of North America, but due to its fast growth rate, it has also been imported to Europe. So far, its nanometre scale properties have not been systematically characterised. In this thesis the microfibril angle of Sitka spruce was shown to depend significantly on the origin of the tree in the first annual rings near the pith. Wood can be further processed to separate lignin from cellulose and hemicelluloses. Solid cellulose can act as a reducer for metal ions and it is also a porous support for nanoparticles. By chemically reducing nickel or copper in the solid cellulose support it is possible to get small nanoparticles on the surfaces of the cellulose fibres. Cellulose supported metal nanoparticles can potentially be used as environmentally friendly catalysts in organic chemistry reactions. In this thesis the size of the nickel and copper containing nanoparticles were studied using anomalous small-angle x-ray scattering and wide-angle x-ray scattering. The anomalous small-angle x-ray scattering experiments showed that the crystallite size of the copper oxide nanoparticles was the same as the size of the nanoparticles, so the nanoparticles were single crystals. The nickel containing nanoparticles were amorphous, but crystallised upon heating. The size of the nanoparticles was observed to be smaller when the reduction of nickel was done in aqueous ammonium hydrate medium compared to reduction made in aqueous solution. Lignin is typically seen as the side-product of wood industries. Lignin is the second most abundant natural polymer on Earth, and it possesses potential to be a useful material for many purposes in addition to being an energy source for the pulp mills. In this thesis, the morphology of several lignins, which were produced by different separation methods from wood, was studied using small-angle and ultra small-angle x-ray scattering. It was shown that the fractal model previously proposed for the lignin structure does not apply to most of the extracted lignin types. The only lignin to which the fractal model could be applied was kraft lignin. In aqueous solutions the average shape of the low molar mass kraft lignin particles was observed to be elongated and flat. The average shape does not necessarily correspond to the shape of the individual particles because of the polydispersity of the fraction and due to selfassociation of the particles. Lignins, and especially lignosulfonate, have many uses as dispersants, binders and emulsion stabilisers. In this thesis work the selfassociation of low molar mass lignosulfonate macromolecules was observed using small-angle x-ray scattering. By taking into account the polydispersity of the studied lignosulfonate fraction, the shape of the lignosulfonate particles was determined to be flat by fitting an oblate ellipsoidal model to the scattering intensity.

Phylogenetic analyses reveal high levels of polyphyly among pleurocarpous lineages as well as novel clades

Phylogenetic analyses of the Hypnales usually show the same picture of poorly resolved trees with a large number of polyphyletic taxa and low support for the few reconstructed clades. One odd clade, however, consisting of three genera that are currently treated either within the Leskeaceae (Miyabea) or Neckeraceae (Homaliadelphus and Bissetia), was retrieved in a previously published phylogeny based on chloroplast rbcL. In order to elucidate the reliability of the observed Homaliadelphus - Miyabea - Bissetia - clade (HMB-clade) and to reveal its phylogenetic relationships a molecular study based on a representative set of hypnalean taxa was performed. Sequence data from all three genomes, namely the ITS1 and 2 (nuclear), the trnS-rps4-trnT-trnL-trnF cluster (plastid), the nad5 intron (mitochondrial), were analyzed. Although the phylogenetic reconstruction of the combined data set was not fully resolved regarding the backbone it clearly indicated the polyphyletic nature of various hypnalean families, such as the Leskeaceae, Hypnaceae, Hylocomiaceae, Neckeraceae, Leptodontaceae and Anomodontaceae with respect to the included taxa. In addition the results favor the inclusion of the Leptodontaceae and Thamnobryaceae in the Neckeraceae. The maximally supported HMB-clade consisting of the three genera Homaliadelphus (2-3 species), Miyabea (3 species) and Bissetia (1 species) is resolved sister to a so far unnamed clade comprising Taxiphyllum aomoriense, Glossadelphus ogatae and Leptopterigynandrum. The well-resolved and supported HMB-clade, here formally described as the Miyabeaceae, fam. nov. is additionally supported by morphological characters such as strongly incrassate, porose leaf cells, a relatively weak and diffuse costa and the presence of dwarf males. The latter are absent in the Neckeraceae and the Leskeaceae. It is essentially an East Asian family, with one species occurring in North America.

Wood-inhabiting Basidiomycetes in the Caucasus Region : Systematics and Biogeography

The Caucasus region is a hotspot of biodiversity and is one of the few areas in the Northern Hemisphere which harbor Pleistocene glacial refugia. The region encompasses Armenia, Azerbaijan, Georgia, the southernmost European Russia, NE Turkey, and northern Iran. The study on fungal composition of the Caucasus region and its connection and possible contribution to the present mycota of Europe has largely escaped empirical scrutiny. Using taxonomic surveys, phylogenetic reconstruction methods, haplotype analysis, and similarity tests, this study has aimed to, 1) summarize the knowledge on the occurrence of corticioids and polypores in the Caucasus region, 2) resolve the phylogenetic relationships of selected, resupinate wood-inhabiting basidiomycetes for which the Caucasus region is currently the mere, or one of the noteworthy areas of distribution, and, 3) assess the similarity of Caucasian corticioid fungi to those of Europe and important areas in the Northern Hemisphere, and to examine the significance of the Caucasus region as a glacial refugium for these fungi. This study provides the first catalogue of corticioids and polypores (635 species) occurring in the Caucasus region. The phylogeny and systematics of the Caucasian resupinate taxa in focus has been resolved and the usefulness of some morphological characters has been re-evaluated. In this context, four new genera and two new species were described and five new combinations were proposed, two of which were supplemented with modern descriptions. The species composition of corticioids in the Caucasus region is found to be distinctly more similar to Europe and North America than to East Asia and India. The highest molecular diversity and within population pairwise distance for Peniophorella praetermissa has been detected in the Caucasus and East Asia, with the isolates of the latter area being highly divergent from the European ones. This, and the assignment of root haplotype to the Caucasian isolates in a haplotype network for Phlebia tuberucalta and P. livida, call attention to the role of the Caucasus region in shaping the current mycota of Europe.

Bear Shields of Plains Indians : Motifs and Meanings

The study is the outcome of two research projects on the North American Indian traditions: the role of the shields within the Plains Indians traditional culture and religion, and the bear ceremonialism of the Native North America, especially the significance of the bear among the Plains Indians. This article-based dissertation includes seven separately published scholar papers, forming Chapters 6 12. The introduction formulates the objectives and frame of reference of the study and the conclusions pulls together its results. The study reconsiders the role of the Plains Indian shields with bear motifs. Such shields are found in rock art, in the Plains Indian s paintings and drawings, and in various collections, the main source material being the shields in European and North American museums. The aim is not only to study shields with bear power motifs and the meanings of the bear, but also to discuss appropriate methods for studying these subjects. There are three major aims of the study: to consider methodical questions in studying Plains Indian shields, to examine the complexity of the Plains Indian shields with the bear power motifs, and to offer new interpretations for the basic meanings of the bear among the Plains Indians and the interrelationship between individualism and collectivism in the Plains Indians visionary art that show bear power motifs on the shields. The study constructs a view on the bear shields taking account of all sources of information available and analysing the shields both as physical artefacts and religious objects from different perspectives, studying them as a part of the ensemble of Plains culture and religious traditions. The bear motifs represented the superhuman power that medicine men and warriors could exploit through visions. For the Plains Indians, the bear was a wise animal from which medicine men could get power for healing but also a dangerous animal from which warriors could get power for warfare. The shields with bear motifs represented the bear powers of the owners of the shields. The bear shield was made to represent the vision, and the principal interpretation of the symbolism was based on the individual experience of spiritual world and its powers. The study argues that the bear shield as personal medicine object is based on wider tribal traditions, and the basic meaning is derived from the collective tradition. This means that the bear seen in vision represented particular affairs and it was represented on the shield surface using conventional ways of traditional artistry. In consequence of this, the bear shields reflect not only the individual experiences of bear power but whole field of tribal traditions that legitimated the experiences and offered acceptable interpretations and conventional modes for the bear symbols.

Studies of fungi associated with Tomicus piniperda L. in Finland

The Scots pine bark beetle, Tomicus piniperda is a secondary colonizer of pine and other conifers. It is a native species from Europe and Asia that was recently introduced in North America. Although it is necessary to understand this insect's interactions with other organisms, few studies have focussed on its fungal associates. This study focused on the effect of latitude in the occurrence of fungi associated with T. piniperda. T. piniperda were collected from Pinus sylvestris in Northern (Rovaniemi) and Southern (Hyytiala) Finland. Both endo- and epi- mycota were isolated. The fungi were identified using a combination of morphological features and molecular data. The results revealed a great diversity of fungi species associated with T. piniperda, with a total of 3073 isolates representing 23 species. The most frequently isolated fungi in the bark beetles from Northern Finland were Beauvaria bassiana, Kuraishia sp. and Penicillium sp. whereas P. brevicompactum and Mortierella sp. were mostly observed in the South. Ophiostoma canum and O. minus were also observed. The number of isolates per insect in the north was 2.83 epi- and 2.38 for endo-mycota fungus. In the south, the number of isolates per insect was 4.1 for epi- and 3.5 for endo-mycota. Statistical analysis indicated that there was significant differences in fungal populations associated with the beetles in Southern and Northern Finland. There was however no significant difference between the epi- and endo-mycota fungal populations. The highest richness and diversity of the fungal species was observed in the South. However, the overall fungal diversity index analysis revealed that the mycobiota was undersampled.